Set the Brightness level by dragging the slider to the right or left to lighten or darken the image. If the
scanned image is too light, set a lower brightness level and scan the document again. If the image is too
dark, set a higher brightness level and scan the document again. You can also type a value into the field to
set the Brightness level.
Increase or decrease the Contrast level by moving the slider to the right or left. An increase emphasises
dark and light areas of the image, while a decrease reveals more details in grey areas. You can also type a
value into the field to set the Contrast level.
Select this option to scan multiple pages. After a page is scanned, select either continue scanning or
ID Card Scan
Select this check box to scan both sides of an identification card onto one page.
Configure advanced settings by clicking the Advanced Settings button in the Scan Settings dialog box.
Remove Bleed-through / Pattern
Remove Background Colour
Remove the base colour of documents to make the scanned data more legible.
Rotate the scanned image.
Skip Blank Page
Remove the document's blank pages from the scanning results.
Display Scanning Results
Show the numbers of total pages saved and blank pages skipped on your computer screen.
ADF Auto Deskew
When scanning the document from the ADF, the machine corrects skewing of the document
Select Document Type Using ControlCenter4 Home Mode (Windows