Introduction to Your Brother Machine
Control Panel Overview
The control panel may vary depending on your model.
1. One Touch Buttons
Store and recall up to eight fax and telephone numbers.
To access stored One Touch fax and telephone numbers 1-4, press the One Touch button assigned to that
number. To access stored One Touch fax and telephone numbers 5-8, press and hold Shift as you press the
2. Function Buttons
Press to dial the last number you called. This button also inserts a pause when programming quick dial
numbers or when dialling a number manually.
Press Tel/R to have a telephone conversation after picking up the external handset during the F/T fast
When connected to a PBX, use this button to gain access to an outside line, to recall an operator, or to
transfer a call to another extension.
WiFi (for wireless models)
Press the WiFi button and launch the wireless installer on your computer. Follow the on-screen
instructions to set up a wireless connection between your machine and your network.
When the WiFi light is on, your Brother machine is connected to a wireless access point. When the WiFi
light blinks, the wireless connection is down, or your machine is in the process of connecting to a wireless
Resolution (for certain models only)
Press to change the Fax resolution.
2 in 1 (ID) Copy
Press to copy both sides of an identification card onto a single page.
Press to copy on both sides of a sheet of paper.
Press to access temporary settings for faxing, scanning, or copying.
> Control Panel Overview