Assigning User Ports To An Ipv6 Multicast Vlan - HP FlexNetwork 7500 Series Configuration Manual

Assigning user ports to an IPv6 multicast VLAN

You must configure a VLAN as an IPv6 multicast VLAN, and then assign the desired user ports to the
IPv6 multicast VLAN. You can assign multiple user ports to an IPv6 multicast VLAN in IPv6 multicast
VLAN view, or assign a user port to an IPv6 multicast VLAN in interface view.
When you perform this task, follow these guidelines:
•
The VLAN to be configured as an IPv6 multicast VLAN must exist.
•
A port can be assigned to only one IPv6 multicast VLAN.
Assigning ports to an IPv6 multicast VLAN in IPv6 multicast VLAN view
Step
Enter system view.
1.
Configure an IPv6 VLAN as
2.
an IPv6 multicast VLAN and
enter its view.
Assign ports to the IPv6
3.
multicast VLAN.
Assigning a port to an IPv6 multicast VLAN in interface view
Step
Enter system view.
1.
Configure an IPv6 VLAN as
2.
an IPv6 multicast VLAN and
enter its view.
Return to system view.
3.
Enter interface view.
4.
Assign the current port to the
5.
IPv6 multicast VLAN.
Setting the maximum number of IPv6 multicast
VLAN forwarding entries
You can set the maximum number of IPv6 multicast VLAN forwarding entries on the device. When
the upper limit is reached, the device does not create IPv6 multicast VLAN forwarding entries until
some entries age out or are manually removed.
If the total number of entries exceeds the upper limit value that you are setting, the system does not
automatically remove existing entries or create new entries. As a best practice, manually remove
some entries to allow new entries to be created.
To set the maximum number of IPv6 multicast VLAN forwarding entries:
Step
Enter system view.
1.
Command
system-view
ipv6 multicast-vlan vlan-id
port interface-list
Command
system-view
ipv6 multicast-vlan vlan-id
quit
interface interface-type interface-number
ipv6 port multicast-vlan vlan-id
Command
system-view
266
Remarks
N/A
By default, a VLAN is not an IPv6
multicast VLAN.
By default, an IPv6 multicast VLAN
does not have any user ports.
Remarks
N/A
By default, a VLAN is not
an IPv6 multicast VLAN.
N/A
N/A
By default, a user port
does not belong to any
IPv6 multicast VLAN.
Remarks
N/A