HP FlexNetwork 7500 Series Configuration Manual page 346

Figure 106 Network diagram
Table 21 Interface and IPv6 address assignment
Device
Switch A
Switch A
Switch B
Switch B
Switch C
Switch C
Configuration procedure
Assign an IPv6 address and prefix length to each interface according to
1.
shown.)
Configure OSPFv3 on the switches in the IPv6 PIM-DM domain. (Details not shown.)
2.
Enable IPv6 multicast routing, MLD, and IPv6 PIM-DM:
3.
# On Switch A, enable IPv6 multicast routing.
<SwitchA> system-view
[SwitchA] ipv6 multicast routing
[SwitchA-mrib6] quit
# Enable MLD on the receiver-side interface (VLAN-interface 100).
[SwitchA] interface vlan-interface 100
[SwitchA-Vlan-interface100] mld enable
[SwitchA-Vlan-interface100] quit
# Enable IPv6 PIM-DM on VLAN-interface 103.
[SwitchA] interface vlan-interface 103
Interface IPv6 address
Vlan-int100 1001::1/64
Vlan-int103 1002::1/64
Vlan-int200 2001::1/64
Vlan-int101 2002::1/64
Vlan-int200 2001::2/64
Vlan-int102 3001::1/64
Device
Switch D
Switch D
Switch D
Switch D
Switch D
Switch D
336
Interface IPv6 address
Vlan-int300 4001::1/64
Vlan-int103 1002::2/64
Vlan-int101 2002::2/64
Vlan-int102 3001::2/64
Vlan-int300 4001::1/64
Vlan-int103 1002::2/64
Table 21. (Details not