HP FlexNetwork 7500 Series Configuration Manual page 305

Figure 91 Network diagram
IPv6 PIM-DM
Configuration procedure
Assign an IPv6 address and prefix length to each interface according to
1.
shown.)
Configure OSPFv3 on the switches in the IPv6 PIM-DM domain. (Details not shown.)
2.
Enable the IPv6 multicast routing, MLD, and IPv6 PIM-DM:
3.
# On Switch A, enable IPv6 multicast routing.
<SwitchA> system-view
[SwitchA] ipv6 multicast routing
[SwitchA-mrib6] quit
# Enable MLD on VLAN-interface 100.
[SwitchA] interface vlan-interface 100
[SwitchA-Vlan-interface100] mld enable
[SwitchA-Vlan-interface100] quit
# Enable IPv6 PIM-DM on VLAN-interface 101.
[SwitchA] interface vlan-interface 101
[SwitchA-Vlan-interface101] ipv6 pim dm
[SwitchA-Vlan-interface101] quit
# On Switch B, enable IPv6 multicast routing.
<SwitchB> system-view
[SwitchB] ipv6 multicast routing
[SwitchB-mrib6] quit
# Enable MLD on VLAN-interface 200.
[SwitchB] interface vlan-interface 200
[SwitchB-Vlan-interface200] mld enable
[SwitchB-Vlan-interface200] quit
# Enable IPv6 PIM-DM on VLAN-interface 201.
[SwitchB] interface vlan-interface 201
[SwitchB-Vlan-interface201] ipv6 pim dm
Vlan-int100
3000::12/64
Switch A
Querier
Vlan-int200
3001::10/64
Switch B
Vlan-int200
3001::12/64
Switch C
Receiver
Host A
N1
Host B
Receiver
Host C
N2
Host D
295
Figure 91. (Details not