HP FlexNetwork 7500 Series Configuration Manual page 273

Ip multicast
Hide thumbs Also See for FlexNetwork 7500 Series:
Table of Contents

Advertisement

Figure 81 Sub-VLAN-based multicast VLAN
MLD snooping manages router ports in the IPv6 multicast VLAN and member ports in each
sub-VLAN. When Switch A receives IPv6 multicast data from the IPv6 multicast source, it sends only
one copy of the IPv6 multicast data to the IPv6 multicast VLAN on Switch B. Then, Switch B sends a
separate copy to each sub-VLAN of the IPv6 multicast VLAN.
Port-based IPv6 multicast VLAN
As shown in
Host A, Host B, and Host C are in VLAN 2 through VLAN 4, respectively. All the user ports
(ports with attached hosts) on Switch B are hybrid ports.
On Switch B, VLAN 10 is an IPv6 multicast VLAN. All the user ports are assigned to VLAN 10.
MLD snooping is enabled for the IPv6 multicast VLAN and its sub-VLANs.
Figure 82 Port-based IPv6 multicast VLAN
Source
MLD snooping manages the router ports and member ports in the IPv6 multicast VLAN. When
Switch A receives IPv6 multicast data from the IPv6 multicast source, it sends only one copy of the
IPv6 multicast data to the IPv6 multicast VLAN on Switch B. Then, Switch B sends a separate copy
to each user port in the IPv6 multicast VLAN.
Figure
82:
IPv6 Multicast packets
VLAN 10 (IPv6 Multicast VLAN)
GE1/0/1
Switch B
Switch A
MLD querier
VLAN 2
VLAN 3
GE1/0/2
GE1/0/3
GE1/0/4
VLAN 4
263
Receiver
Host A
Receiver
Host B
Receiver
Host C

Advertisement

Table of Contents
loading

Table of Contents