Displaying And Maintaining Multicast Vpn - HP FlexNetwork 7500 Series Configuration Manual

Perform this task on PE devices. For more information about the commands in this task, see Layer
3—IP Routing Command Reference.
To configure a BGP MDT route reflector:
Step
Enter system view.
1.
Enter BGP view.
2.
Enter BGP IPv4 MDT
3.
address family view.
Configure the device as a
4.
route reflector and specify its
peers or peer groups as
clients.
(Optional.) Disable route
5.
reflection between clients.
(Optional.) Configure the
6.
cluster ID of the route
reflector.

Displaying and maintaining multicast VPN

Execute display commands in any view and reset commands in user view.
Task
Display BGP MDT peer group
information.
Display information about BGP
MDT peers or peer groups.
Display BGP MDT routing
information.
Display information about BGP
update groups for the BGP IPv4
MDT address family.
Display data-group information
received by a VPN instance in the
MD.
Display data-group information
sent by a VPN instance in the
MD.
Display default-group
information.
Reset the BGP sessions for the
BGP IPv4 MDT address family.
For more information about the display bgp group, display bgp peer, display bgp update-group,
and reset bgp commands, see Layer 3—IP Routing Command Reference.
Command
system-view
bgp as-number
address-family ipv4 mdt
peer { group-name | ip-address
[ mask-length ] } reflect-client
undo reflect between-clients
reflector cluster-id { cluster-id |
ip-address }
Command
display bgp group ipv4 mdt [ group-name group-name ]
display bgp peer ipv4 mdt [ ip-address mask-length | { ip-address |
group-name group-name } log-info | [ ip-address ] verbose ]
display bgp routing-table ipv4 mdt [ route-distinguisher
route-distinguisher ] [ ip-address [ advertise-info ] ]
display bgp update-group ipv4 mdt [ ip-address ]
display multicast-domain vpn-instance vpn-instance-name
data-group receive [ brief | [ active | group group-address | sender
source-address | vpn-source-address [ mask { mask-length | mask } ] |
vpn-group-address [ mask { mask-length | mask } ] ] * ]
display multicast-domain vpn-instance vpn-instance-name
data-group send [ group group-address | reuse interval |
vpn-source-address [ mask { mask-length | mask } ] |
vpn-group-address [ mask { mask-length | mask } ] ] *
display multicast-domain [ vpn-instance vpn-instance-name ]
default-group
reset bgp { as-number | ip-address [ mask-length ] | all | external |
group group-name | internal } ipv4 mdt
198
Remarks
N/A
N/A
N/A
By default, neither route reflectors
nor clients exist.
By default, route reflection between
clients is disabled.
By default, a route reflector uses its
router ID as the cluster ID.