HP FlexNetwork 7500 Series Configuration Manual page 178

Ip multicast
Hide thumbs Also See for FlexNetwork 7500 Series:
Table of Contents

Advertisement

Device
Switch B
Switch B
Switch B
Switch C
Switch C
Switch C
Configuration procedure
Assign an IP address and subnet mask to each interface according to
1.
shown.)
Configure OSPF on the switches in the ASs. (Details not shown.)
2.
Enable IP multicast routing, PIM-SM, and IGMP, and configure PIM-SM domain borders:
3.
# On Switch C, enable IP multicast routing.
<SwitchC> system-view
[SwitchC] multicast routing
[SwitchC-mrib] quit
# Enable PIM-SM on each interface, and enable IGMP on the receiver-side interface
VLAN-interface 200.
[SwitchC] interface vlan-interface 102
[SwitchC-Vlan-interface102] pim sm
[SwitchC-Vlan-interface102] quit
[SwitchC] interface vlan-interface 200
[SwitchC-Vlan-interface200] igmp enable
[SwitchC-Vlan-interface200] quit
[SwitchC] interface vlan-interface 104
[SwitchC-Vlan-interface104] pim sm
[SwitchC-Vlan-interface104] quit
# Configure Switch A, Switch B, Switch D, Switch E, Switch F, and Switch G in the same way
Switch C is configured. (Details not shown.)
# On Switch B, configure the PIM domain borders.
[SwitchB] interface vlan-interface 103
[SwitchB-Vlan-interface103] pim bsr-boundary
[SwitchB-Vlan-interface103] quit
# Configure the PIM domain borders on Switch C, Switch D, and Switch F in the same way
Switch B is configured. (Details not shown.)
Configure C-BSRs and C-RPs:
4.
# On Switch A, configure Loopback 0 as a C-BSR and a C-RP.
[SwitchA] pim
[SwitchA-pim] c-bsr 1.1.1.1
[SwitchA-pim] c-rp 1.1.1.1
[SwitchA-pim] quit
# Configure C-BSRs and C-RPs on Switch D and Switch G in the same way Switch A is
configured. (Details not shown.)
Configure BGP, and redistribute BGP routing information into OSPF and OSPF routing
5.
information into BGP:
Interface
IP address
Vlan-int101
10.110.1.2/24
Vlan-int100
192.168.1.1/24
Vlan-int103
10.110.3.1/24
Vlan-int102
10.110.2.2/24
Vlan-int200
192.168.2.1/24
Vlan-int104
10.110.4.1/24
Device
Interface
Switch F
Vlan-int106
Switch F
Vlan-int104
Switch G
Vlan-int106
Switch G
Vlan-int400
Switch G
Loop0
168
IP address
10.110.6.1/24
10.110.4.2/24
10.110.6.2/24
192.168.4.1/24
3.3.3.3/32
Table
13. (Details not

Advertisement

Table of Contents
loading

Table of Contents