Cisco Catalyst 3750 Hardware Installation Manual page 176

Stacking the Switches (Optional)
Insert one end of the StackWise cable into the StackWise port at the back of a
Step 1
switch. See Figure C-3.
Note
Use the window in the StackWise cable to align the connector correctly. Secure
Step 2
the screws tightly.
Insert the other end of the cable into the connector of the other switch, and secure
Step 3
the screws tightly.
See the
for detailed installation procedures on how to connect the switches in a stack.
Figure C-3
Catalyst 3750 Switch Hardware Installation Guide
C-6
Appendix C
Always use a Cisco-approved StackWise cable to connect the switches.
"Connecting StackWise Cable to StackWise Ports" section on page 3-38
Connecting the StackWise Cable to a StackWise Port
S T A C K
Configuring the Switch with the CLI-Based Setup Program
1
C O N S O
S T A C K
2
L E
78-15136-03