Cisco Catalyst 3750 Hardware Installation Manual page 40

Starting Express Setup
Figure 1-6
1 Switch
2 Ethernet cable
Connect the other end of the cable to the Ethernet port on the PC or workstation.
Step 5
Verify that the port status LEDs on both connected Ethernet ports are green.
Wait approximately 30 seconds after the port LEDs turn green, and launch a web
Step 6
browser on your PC or workstation.
Enter the IP address 10.0.0.1, as shown in
Step 7
Figure 1-7
The Express Setup home page appears, as shown in
Catalyst 3750 Switch Hardware Installation Guide
1-8
Connecting the Switch and PC or Workstation Ethernet Ports
SYS T
RPS
MAS TR
STA T 1X
DUP LX
SPE ED
STA CK
MO DE 11X
2X
12X
3 PC or workstation
Entering the IP Address
1
13X
Ca tal yst
37 50
23X
SER IES
14X
24X
3
Figure 1-7, and press Enter.
Chapter 1 Using Express Setup
2
Figure 1-8.
78-15136-03