Cisco Catalyst 3750 Hardware Installation Manual page 117

Chapter 3 Switch Installation
Figure 3-34 Inserting the StackWise Cable in a StackWise Port
78-15136-03
When the connectors are not being used, replace the dust covers on them
Note
to protect them from dust.
S T A C K
When you need to remove the StackWise cable from the connector, make sure to
fully unscrew the screws before removing the connector. Also make sure that you
remove the correct screws from the StackWise port. See
removal procedures and
Connecting StackWise Cable to StackWise Ports
1
S T A C K
Figure 3-36 for incorrect removal procedures.
Catalyst 3750 Switch Hardware Installation Guide
C O N S O
L E
2
Figure 3-35 for correct
3-39