Appendix C
Configuring the Switch with the CLI-Based Setup Program
Accessing the CLI Through the Console Port
78-15136-03
You can access the CLI on a configured or unconfigured switch by connecting the
console port of the switch to the serial port on your PC or workstation and
accessing the switch through a Telnet session.
To access the switch through the console port, follow these steps:
"Taking Out What You Need" section on page
•
"Connecting to the Console Port" section on page C-7
•
"Starting the Terminal Emulation Software" section on page C-9
•
"Connecting to a Power Source" section on page C-9
•
"Entering the Initial Configuration Information" section on page C-11
•
Catalyst 3750 Switch Hardware Installation Guide
Accessing the CLI
C-4.
C-3