Cisco Catalyst 3750 Hardware Installation Manual page 45

Chapter 1 Using Express Setup
Rerunning Express Setup
Verifying Switch IP Address
Step 1
Step 2
78-15136-03
If you did not click Save at the end of the
rerun Express Setup by clicking Express Setup on the Switch home page.
If you have entered a wrong IP address or need to change the IP address of your
switch, you can clear the IP address on your switch by following the steps in the
"Clearing the Switch IP Address and Configuration" section on page
This procedure is optional. After you have installed the switch in your network,
follow these steps to verify the IP address configured on your switch:
Launch a web browser on a PC or workstation that is connected the network.
Enter the IP address of your switch (for example: 172.20.139.142.) The switch
home page appears, as shown in Figure 1-9.
Configuring the Switch
Catalyst 3750 Switch Hardware Installation Guide
Rerunning Express Setup
section, you can
4-2.
1-13