Cisco Catalyst 3750 Hardware Installation Manual page 38

Starting Express Setup
Follow these steps to start the Express Setup program:
Verify that no devices are connected to the switch.
Step 1
Press and hold the Mode button, as shown in
Step 2
above the Mode button turn green. This takes approximately 2 seconds.
Note
Figure 1-4
M O D E
1 Mode button
Catalyst 3750 Switch Hardware Installation Guide
1-6
On the Catalyst 3750-24PS and 3750-48PS switches, the five LEDs above
the Mode button turn green during this step.
Catalyst 3750 switch Mode Button
S Y S T
R P S
M A S T R
S T A T
D U P L X
S P E E D
S T A C K
1
Chapter 1 Using Express Setup
Figure 1-4, until the four LEDs
78-15136-03