Configuring The Switch With The Cli-Based Setup Program - Cisco Catalyst 3750 Hardware Installation Manual

Configuring the Switch with the
CLI-Based Setup Program
This appendix provides a CLI-based setup procedure for a standalone switch or a
switch stack. Before connecting the switch to a power source, review the safety
warnings in
For detailed installation procedures on rack-mounting your switch, stacking your
Note
switches, or connecting to small form-factor pluggable (SFP) or XENPAK
modules, see
see
These steps describe how to do a simple installation:
1.
2.
3.
4.
5.
6.
7.
78-15136-03
Chapter 3, "Switch Installation."
Chapter 3, "Switch Installation."
Chapter 2, "Product Overview."
Accessing the CLI, page C-2
Taking Out What You Need, page C-4
Stacking the Switches (Optional), page C-5
Connecting to the Console Port, page C-7
Starting the Terminal Emulation Software, page C-9
Connecting to a Power Source, page C-9
Entering the Initial Configuration Information, page C-11
A P P E N D I X
For product overview information,
Catalyst 3750 Switch Hardware Installation Guide
C
C-1