Factory Defaults Table
Parameter
System Settings
Barcode Programming
Programming Barcode Data
Scan Mode
Manual Mode
Decode Session Timeout
Decode Session Timeout
Timeout between Decodes
Continuous Mode
Reread Same Barcode
Decode Session Timeout
Image Stabilization Timeout
Sense Mode
Reread Same Barcode
Sensitivity
Command
Trigger
Decode Session Timeout
Mode
Security Level
Good Read Beep
Good Read Beep Frequency
Good Read Beep Duration
Decode Result Notification
Silent Mode
Illumination
155
Appendix
Factory Default
Enabled
Do not send
Manual Mode
15s
15s
1.0s
With no delay
15s
0.4s
With no delay
Medium
15s
0
Enabled
Medium
80ms
Disabled
Disabled
On When Scanning
Remark
1-255s; 0: infinite.
1-255s; 0: infinite.
0.0-25.5s
To disable rereads of same
barcode, enable the Reread
Same Barcode with a Delay and
set the delay to 0.
1-255s; 0: infinite.
0.0-25.5s
To disable rereads of same
barcode, enable the Reread
Same Barcode with a Delay and
set the delay to 0.
1-255s; 0: infinite.
Temporary setting
Temporary setting