Fiber: Led And Eled Transmitters - GE L30 Instruction Manual

3.3 PILOT CHANNEL COMMUNICATIONS
The current differential function must be "Enabled" for the communications module to properly operate. Refer to

SETTINGS
NOTE
The fiber optic modules (7A to 7W) are designed for back-to-back connections of UR-series relays only. For con-
nections to higher-order systems, use the 72 to 77 modules or the 2A and 2B modules.
NOTE
The following figure shows the configuration for the 7A, 7B, 7C, 7H, 7I, and 7J fiber-only modules.
3
The following figure shows the configuration for the 72, 73, 7D, and 7K fiber-laser module.
Observing any fiber transmitter output can injure the eye.
3-28

GROUPED ELEMENTS LINE DIFFERENTIAL
Observing any fiber transmitter output can injure the eye.
Figure 3–26: LED AND ELED FIBER MODULES
Figure 3–27: LASER FIBER MODULES
L30 Line Current Differential System
 menu.
CURRENT DIFFERENTIAL

3.3.2 FIBER: LED AND ELED TRANSMITTERS

3.3.3 FIBER-LASER TRANSMITTERS
3 HARDWARE
GE Multilin