GE L30 Instruction Manual page 250

5.4 SYSTEM SETUP
MODIFICATION OF SYNC WORD IN CFG-2 FOR TR 90-5 DATA SETS
In the CFG-2 file, all relevant information about the data being streamed is included. However, this file does not include the
fact that it describes a 90-5 dataset or the number of Application Service Data Units (datasets). In order to communicate
this information via the CFG-2 file for a given aggregator, when the aggregator is set to 90-5, the version number of the
CFG-2 file (found in bits 0-3 of the frame SYNC word - which should presently be set to 2) is set as follows:
VALUE
(DECIMAL) # OF ASDUS
11 1
12 2
13 3
14 4
The PMU settings are organized in logical groups as follows.

PATH: SETTINGS SYSTEM SETUP
 PHASOR MEASUREMENT
 UNIT 1
5
b) BASIC CONFIGURATION

PATH: SETTINGS SYSTEM SETUP
 PMU 1 BASIC
 CONFIGURATION
5-114

PHASOR MEASUREMENT UNIT
 PMU 1 BASIC
 CONFIGURATION
 PMU 1
MESSAGE
 CALIBRATION
 PMU 1
MESSAGE
 TRIGGERING
 PMU 1
MESSAGE
 RECORDING

PHASOR MEASUREMENT
PMU 1
FUNCTION: Disabled
PMU 1 IDCODE:
MESSAGE
1
PMU 1 STN:
MESSAGE
GE-UR-PMU
PMU 1 SIGNAL SOURCE:
MESSAGE
SRC 1
PMU 1 CLASS:
MESSAGE
CLASS M
PMU 1 FORMAT:
MESSAGE
Integer
PMU 1 STYLE:
MESSAGE
Polar
PMU 1 RATE:
MESSAGE
10/sec
PMU 1 PHS-1:
MESSAGE
Off
PMU 1 PHS-1
MESSAGE
NAME: GE-UR-PMU-PHS-1
L30 Line Current Differential System

PHASOR MEASUREMENT UNIT 1
See page 5-114.
See page 5-118.
See page 5-119.
See page 5-127.

BASIC CONFIGURATION
Range: Enabled, Disabled
Range: 1 to 65534 in steps of 1
Range: 32-character ASCII string truncated to 16
characters if mapped into C37.118 Default: GE-UR-PMU
Range: Available signal sources
Range: None, CLASS M, CLASS P
Range: Integer, Floating-point
Range: Polar, Rectangular
Range: 1/sec, 2/sec, 4/sec, 5/sec, 10/sec, 12/sec, 15/
sec, 20/sec, 25/sec, 30/sec, 50/sec, 60/sec, 100/
sec, 120/sec
Range: Available synchrophasor values
Range: 16 -character ASCII string
↓
5 SETTINGS

PMU1
GE Multilin