Internal Dual Sd Module Indicator Codes - Dell PowerEdge R930 Owner's Manual

Convention Power Indicator
Pattern
E Not lit

Internal dual SD module indicator codes

The Internal Dual SD module (IDSDM) provides you with a redundant SD card solution. You can configure the IDSDM for storage or as the
OS boot partition. The IDSDM card offers the following features:
• Dual card operation — maintains a mirrored configuration by using SD cards in both the slots and provides redundancy.
NOTE: When the Redundancy option is set to Mirror Mode in the Integrated Devices screen of System Setup, the information
is replicated from one SD card to another.
• Single card operation — single card operation is supported, but without redundancy.
Figure 10. Internal dual SD module (IDSDM)
1 LED status indicator (2)
The following table describes the IDSDM indicator codes:
Table 10. IDSDM indicator codes
Convention
A
B
C
D
20 About the PowerEdge R930
Condition
CAUTION:
same maximum output power.
CAUTION:
mismatch.
Power is not connected.
IDSDM indicator code
Green
Flashing green
Flashing amber
Amber
If two PSUs are used, they must be of the same type and have the
Combining AC and DC PSUs is not supported and triggers a
Description
Indicates that the card is online.
Indicates rebuild or activity.
Indicates card mismatch or that the card has failed.
Indicates that the card is offline, has failed, or is write-protected.