Installing An Internal Sd Card - Dell PowerEdge R930 Owner's Manual

Figure 64. Removing an internal SD card
1 IDSDM
3 SD card 2
5 SD card slot 1
Next step
Follow the procedure listed in the After working inside your system section.
Related links
Safety instructions
Before working inside your system

Installing an internal SD card

After working inside your system
Installing an internal SD card
Prerequisites
1 Follow the safety guidelines listed in the Safety instructions section.
2 Follow the procedure listed in the Before working inside your system section.
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple
repairs as authorized in your product documentation, or as directed by the online or telephone service and support team.
Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
NOTE: To use an SD card with your system, ensure that the Internal SD Card Port is enabled in System Setup.
NOTE: Temporarily label each SD card with its corresponding slot number before removal. Re-install the SD card(s) into the
corresponding slots.
2 SD card 1
4 SD card slot 2
Installing and removing system components 125