Dell PowerEdge R930 Owner's Manual page 134

5 Lift the processor out of the socket and leave the open first socket-release lever up.
NOTE: If you are permanently removing the processor, you must install a socket protective cap in the vacant socket to
protect the socket pins and keep the socket free of dust.
NOTE: After removing the processor, place it in an anti-static container for reuse, return, or temporary storage. Do not
touch the bottom of the processor. Touch only the side edges of the processor.
Figure 71. Processor shield
1 close first socket release lever
3 processor
5 unlock icon
134 Installing and removing system components
2 lock icon
4 open first socket release lever