Cooling Fans - Dell PowerEdge R930 Owner's Manual

Figure 27. Installing the memory riser and fan cage
1 cage handle lock
3 memory riser and fan cage
5 guide rail (2)
7 chassis
Next steps
1 Install the following:
a Memory risers
b

Cooling fans

c Memory riser blanks, if removed
2 Follow the procedure listed in the After working inside your system section.
Related links
Safety instructions
Before working inside your system
Installing a memory riser
Installing a cooling fan
Installing a memory riser blank
After working inside your system
Cooling fans
Your system supports six hot-swappable cooling fans that are mounted in a memory riser and fan cage. These fans provide cooling for the
processors, expansion cards, and memory modules. Individual fans are connected to the fan tray located below the fan cage. The fan tray is
connected through a single 12x2 connector to the system board.
82 Installing and removing system components
2 cage handle
4 rear handle
6 guide on the chassis (2)