Installing A Processor And Heat Sink Blank - Dell PowerEdge R930 Owner's Manual

Related links
Safety instructions
Before working inside your system
Removing a memory riser
Removing a cooling fan
Removing the memory riser and fan cage
Removing the cable management tray
Removing the fan tray
Installing a processor
Installing a heat sink

Installing a processor and heat sink blank

After working inside your system
Installing a processor and heat sink blank
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple
repairs as authorized in your product documentation, or as directed by the online or telephone service and support team.
Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1 Follow the safety guidelines listed in the Safety instructions section.
2 Follow the procedure listed in the Before working inside your system section.
Steps
1 Align the tabs on the processor and heat sink blank with the slots on the memory riser guide.
2 Orient the processor and heat sink blank such that the tabs on the processor and heat sink blank engage with the slots on the
memory riser guide.
3 Lower the processor and heat sink blank into the system until the release tab clicks into place.
142 Installing and removing system components