Nic Indicator Codes; Idrac Direct Led Indicator Codes - Dell PowerEdge R930 Owner's Manual

NIC indicator codes

Each NIC on the back panel has an indicator that provides information about the network activity and link status. The activity LED indicates
whether the NIC is currently connected or not. The link LED indicates the speed of the connected network.
Figure 7. NIC indicators
1 link indicator
Table 6. NIC indicators
Convention
A
B
C
D

iDRAC Direct LED indicator codes

The iDRAC Direct LED indicator lights up to indicate that the port is connected and is being used as a part of the iDRAC subsystem.
NOTE: The iDRAC Direct LED indicator does not turn on when the USB port is used in the USB mode.
Status
Link and activity indicators are off
Link indicator is green
Link indicator is amber
Activity indicator is flashing green
2 activity indicator
Condition
The NIC is not connected to the network.
The NIC is connected to a valid network at its
maximum port speed (1 Gbps or 10 Gbps).
The NIC is connected to a valid network at less than
its maximum port speed.
Network data is being sent or received.
About the PowerEdge R930 17