Internal Dual Sd Module Indicator Codes; Idrac Direct Led Indicator Codes - Dell PowerEdge R330 Owner's Manual

Convention
C
D

Internal dual SD module indicator codes

The Internal Dual SD module (IDSDM) provides you with a redundant SD card solution. You can configure the IDSDM for storage or
as the OS boot partition. The IDSDM card offers the following features:
• Dual card operation — maintains a mirrored configuration by using SD cards in both the slots and provides redundancy.
NOTE: When the Redundancy option is set to Mirror Mode in the Integrated Devices screen of System Setup, the
information is replicated from one SD card to another.
• Single card operation — single card operation is supported, but without redundancy.
The following table describes the IDSDM indicator codes:
Table 8. IDSDM indicator codes
Convention
A
B
C
D
E

iDRAC Direct LED indicator codes

The iDRAC Direct LED indicator lights up to indicate that the port is connected and is being used as a part of the iDRAC subsystem.
NOTE: The iDRAC Direct LED indicator does not turn on when the USB port is used in the USB mode.
Figure 9. iDRAC Direct LED indicator
1. iDRAC Direct status indicator
The iDRAC Direct LED indicator table describes iDRAC Direct activity when configuring iDRAC Direct by using the management port
(USB XML Import).
Status
Link indicator is amber
Activity indicator is flashing green
IDSDM indicator code
Green
Flashing green
Flashing amber
Amber
Not lit
Condition
The NIC is connected to a valid network at less than its
maximum port speed.
Network data is being sent or received.
Description
Indicates that the card is online.
Indicates rebuild or activity.
Indicates card mismatch or that the card has failed.
Indicates that the card is offline, has failed, or is write-
protected.
Indicates that the card is missing or is booting.
19