Removing An Internal Sd Card - Dell PowerEdge R930 Owner's Manual

Figure 63. Removing the optional SD vFlash card
1 SD vFlash card
Internal dual SD module (optional)
The Internal Dual SD Module (IDSDM) card provides two SD card slots. This card offers the following features:
• Dual card operation — maintains a mirrored configuration by using SD cards in both the slots and provides redundancy.
NOTE: When the Redundancy option is set to Mirror Mode in the Integrated Devices screen of System Setup, the information
is replicated from one SD card to another.
• Single card operation — single card operation is supported, but without redundancy.

Removing an internal SD card

Prerequisites
1 Follow the safety guidelines listed in the Safety instructions section.
2 Follow the procedure listed in the Before working inside your system section.
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple
repairs as authorized in your product documentation, or as directed by the online or telephone service and support team.
Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
NOTE: Temporarily label each SD card with its corresponding slot number before removal. Re-install the SD card(s) into the
corresponding slots.
Step
Locate the SD card slot on the internal dual SD module and press the card to release it from the slot.
124 Installing and removing system components
2 SD vFlash card slot