Sd Vflash Card (Optional) - Dell PowerEdge R930 Owner's Manual

Figure 62. Installing the chassis intrusion switch
1 intrusion switch slot
3 hook on the NDC riser bracket
Next steps
1 Install the NDC.
2 Install the NDC riser.
3 Follow the procedure listed in the After working inside your system section.
Related links
Safety instructions
Before working inside your system
Installing the network daughter card
Installing the Network Daughter Card riser
After working inside your system

SD vFlash card (optional)

An SD vFlash card is a Secure Digital (SD) card that plugs into the SD vFlash card slot in the iDRAC port card. It provides persistent on-
demand local storage and a custom deployment environment that enables automation of server configuration, scripts, and imaging. It
emulates USB device(s). For more information, see the Integrated Dell Remote Access Controller User's Guide at Dell.com/idracmanuals.
Removing the optional SD vFlash card
Prerequisites
1 Follow the safety guidelines listed in the Safety instructions section.
2 Locate the SD vFlash card slot at the back of the chassis.
Step
To remove the SD vFlash card, push the SD vFlash card inward to release it, and pull the SD vFlash card from the SD vFlash card slot.
2 chassis intrusion switch
4 chassis intrusion switch connector
Installing and removing system components 123