Installing and removing system components
This section provides information about installing and removing the R930 components.
Topics:
•
Safety instructions
•
Before working inside your system
•
After working inside your system
•
Recommended tools
•
Front bezel (optional)
•
System cover
•
Inside the system
•
System memory
•
Memory riser
•
Memory riser and fan cage
•
Cooling fans
•
Cable management tray
•
Hard drives
•
Optical drive (optional)
•
Internal USB memory key (optional)
•
Expansion cards and expansion card risers
•
Network Daughter Card riser
•
Network daughter card
•
Chassis intrusion switch
•
SD vFlash card (optional)
•
Internal dual SD module (optional)
•
Integrated storage controller card
•
Processors and heat sinks
•
Power supply units
•
Power distribution board
•
System battery
•
Hard drive backplane
•
SAS expander daughter card
•
Control panel
•
System board
•
Trusted Platform Module
Safety instructions
WARNING:
Whenever you need to lift the system, get others to assist you. To avoid injury, do not attempt to lift the system by
yourself.
WARNING:
Opening or removing the system cover while the system is powered on may expose you to a risk of electric shock.
Installing and removing system components
6
59