Indicator Codes For Redundant Power Supply Unit - Dell PowerEdge R930 Owner's Manual

Figure 8. iDRAC Direct LED indicator
1 iDRAC Direct status indicator
The iDRAC Direct LED indicator table describes iDRAC Direct activity when configuring iDRAC Direct by using the management port (USB
XML Import).
Table 7. iDRAC Direct LED indicators
Convention iDRAC Direct LED
indicator pattern
A Green
B Flashing green
C Green and turns off
D Not lit
The following table describes iDRAC Direct activity when configuring iDRAC Direct by using your laptop and cable (Laptop Connect):
Table 8. iDRAC Direct LED indicator patterns
iDRAC Direct LED
indicator pattern
Solid green for two seconds Indicates that the laptop is connected.
Flashing green (on for two
seconds and off for two
seconds)
Turns off

Indicator codes for redundant power supply unit

Each AC power supply unit (PSU) has an illuminated translucent handle that indicates whether power is present or whether a power fault
has occurred.
18 About the PowerEdge R930
Condition
Turns green for a minimum of two seconds to indicate the start and end of a file transfer.
Indicates file transfer or any operation tasks.
Indicates that the file transfer is complete.
Indicates that the USB is ready to be removed or that a task is complete.
Condition
Indicates that the laptop connected is recognized.
Indicates that the laptop is unplugged.