Nic Indicator Codes; Internal Dual Sd Module Indicator Codes - Dell PowerEdge R430 Owner's Manual

NIC indicator codes

The NIC on the back panel has an indicator that provides information about the network activity and link status. The activity
LED indicates whether the NIC is currently connected or not. The link LED indicates the speed of the connected network.
Figure 11. NIC Indicator Codes
1. link indicator
2. activity indicator
Table 11. NIC indicators
Convention
A
B
C
D

Internal dual SD module indicator codes

The Internal Dual SD module (IDSDM) provides you with a redundant SD card solution. You can configure the IDSDM for storage
or as the OS boot partition. The IDSDM card offers the following features:
● Dual card operation — maintains a mirrored configuration by using SD cards in both the slots and provides redundancy.
When the Redundancy option is set to Mirror Mode in the Integrated Devices screen of System Setup, the
NOTE:
information is replicated from one SD card to another.
● Single card operation — single card operation is supported, but without redundancy.
24 Dell PowerEdge R430 system overview
Status
Link and activity indicators are off.
Link indicator is green.
Link indicator is amber
Activity indicator is flashing. green
Condition
The NIC is not connected to the network.
The NIC is connected to a valid network at its maximum
port speed (1 Gbps or 10 Gbps).
The NIC is connected to a valid network at less than its
maximum port speed.
Network data is being sent or received.