Nic Indicator Codes; Internal Dual Sd Module Indicator Codes - Dell W4X15 Owner's Manual

NIC indicator codes

Each NIC on the back panel has an indicator that provides information about the network activity and link
status. The activity LED indicates whether the NIC is currently connected or not. The link LED indicates
the speed of the connected network.
Figure 11. NIC indicators
1. link indicator
Table 11. NIC indicators
Convention Status
A Link and activity indicators are off
B Link indicator is green
C Link indicator is amber
D Activity indicator is flashing green

Internal dual SD module indicator codes

The Internal Dual SD module (IDSDM) provides you with a redundant SD card solution. You can configure
the IDSDM for storage or as the OS boot partition. The IDSDM card offers the following features:
• Dual card operation — maintains a mirrored configuration by using SD cards in both the slots and
provides redundancy.
NOTE: When the Redundancy option is set to Mirror Mode in the Integrated Devices screen of
System Setup, the information is replicated from one SD card to another.
• Single card operation — single card operation is supported, but without redundancy.
2. activity indicator
Condition
The NIC is not connected to the
network.
The NIC is connected to a valid network
at its maximum port speed (1 Gbps or 10
Gbps).
The NIC is connected to a valid network
at less than its maximum port speed.
Network data is being sent or received.
27