Sd Vflash Card (Optional) - Dell E31S Series Owner's Manual

Steps
1. Align the notches on the backplane with the notches on the chassis.
2. Lift the release pin and slide the backplane toward the back of the chassis until firmly seated.
3. Release the release pin to lock the backplane to the chassis.
4. Reconnect all the cables to the backplane.
Figure 76. Installing the optional 2.5 inch (x2) hard drive backplane
1. SAS cable
3. hard drive connector (2)
5. backplane signal cable
Next steps
1. Install both the hard drives in their original location.
2. Follow the procedure listed in the After working inside your system section.
Related tasks
Before working inside your system
After working inside your system
Related reference
Safety instructions

SD vFlash card (optional)

An SD vFlash card is a Secure Digital (SD) card that plugs into the SD vFlash card slot in the iDRAC port card. It provides persistent on-
demand local storage and a custom deployment environment that enables automation of server configuration, scripts, and imaging. It
2. release pin
4. power cable
Installing and removing system components 135