Service Pc - Aastra OpenCom 510 User Manual

Interfaces and Connectible Terminals
The DSL modem is connected by means of a crossed twisted-pair cable. Alterna-
tively, you can use a switchable port on the hub, which is usually marked with an
"X".
TAE
DSL & Uk
0
DSL
Splitter
Uk NTBA
DSL 0
Crosslinked twisted pair cable
DSL
Modem
Network connection of the OpenCom 510 via ISDN and DSL

5.5.2 Service PC

The Ethernet interface can also be used to connect a service PC using a crossed
Ethernet cable.
5.6 COM Port
The COM port (V.24-1 interface) on the MC+1-3 central control module can be
used to connect a PC for the purpose of transmitting connection data. Connection
data can be analysed in detail with the connection data recording program Open-
Count.
Please note:
The V.24 interface uses a transmission rate of 19.2 kbits/s.
52
OpenCom
S Net
0
TCP/IP &
PPPoE
S
0
PPPoE
Hub
The COM port cable must not be longer than 3 metres.
Note: A special 10-pin cable is required for connecting ap-
paratus to the V.24-1 interface. Contact your Aastra DeTeWe
distributor or local retailer if you want to purchase one of
these cables.
PC
TCP/IP
Net
COM Port