Configuring For A Remote Location - Aastra OpenCom 510 User Manual

®
DECToverIP

11.2.4 Configuring for a remote location

If you are using a DECToverIP base station in the same LAN as the OpenCom 510,
the IP address configuration and software loading procedure which are run when
a DECToverIP base station is started are handled by the OpenCom 510 using the
DHCP and TFTP protocols.
For the DHCP function to be available, the DECToverIP base station must be able to
reach the OpenCom 510 via a "Broadcast". In the case of a remote location this
kind of access - via a VPN connection for example - will not be possible. As in the
case of an IP system telephone, you will have to acquire the necessary system
software for the DECToverIP base station with the help of a TFTP server.
Local IP address configuration
The IP address configuration can be set up as a "local configuration" with the help
of an additional program.
1. Open the product CD and call up the "OpenMobility Configurator" Java
program. Open Windows Explorer, go to the "Aastra-DeTeWe" directory and
double-click on the OM_Configurator.jar" file.
rity, prevent them from being able to access each others'
computers. Activate the BSS Isolation option. You can also
stop unpleasant guests from using the system with a MAC
Address Filter – but this will not hold up users who know
about this function for long.
Note: You need a Java runtime library to be able to run Java
programs. If you don't have one installed, you can install one
by starting the "j2re-windows-i586-p.exe" installation pro-
gram.
Configuration
141