Aastra OpenCom 510 User Manual page 140

®
DECToverIP
(OMM, OpenMobility Manager). You can reach this address by entering the IP
address of the DECToverIP Manager directly into the address bar of your Web
Browser. Alternatively, you can also go to the Configurator, to the page PBX Con-
figuration: Devices: DECToverIP and click on the WLAN Config. button. Log in
under the User Name "Administrator" and enter the same password as for the
OpenCom 510.
DECToverIP/OpenMobility Managers Login Page
The WLAN function and the function of the DECToverIP/OpenMobility Manager
cannot be used simultaneously on the same DECToverIP base station, so you will
always need at least two DECToverIP base stations. The WLAN settings are then
made as follows:
1. Set up the existing DECToverIP base stations in theOpenCom 510's Configu-
rator. Go to the DECToverIP Manager's Web Configurator.
2. On the WLAN Profiles page, configure at least one set of settings (see below
under: Setting up a WLAN profile). Note down the password you have used
("Pre-Shared Key"), so that you will be able to use it again later when setting up
wireless user terminals or notebooks.
3. Assign the desired WLAN profile on the Radio Fixed Parts page. Click on
spanner symbol ( ) on the left next to the relevant DECToverIP base station.
Under WLAN Settings select the number of the configured WLAN Profile.
Confirm your settings with OK. You can use one profile for multiple DECToverIP
base stations.
You can now use the WLAN function of your WLAN-enabled DECToverIP base sta-
tions and set up the user terminals as required.
138
Configuration