Dual Operation - Aastra OpenCom 510 User Manual

®
DECToverIP Configuration
Configurator: PBX Configuration: Devices: DECToverIP
User administration and set-up of DECT terminals is done in the Configurator of
the OpenCom 510 as well.
The DECToverIP Manager offers a separate web user interface to manage the set-
tings of devices with WLAN functions. Therefore at least one WLAN-RFP has to be
configured. If everything is configured correctly, you will see the WLAN Config
link. Login as the user "Administrator" with the currently set administrator's
password of the OpenCom 510.

11.2.1 Dual operation

Simultaneous operation of base stations via U access and base stations via Eth-
pn
ernet access is possible with the OpenCom 510. Transparent handovers, for
example, are only possible when between DECT base stations using the same
access technology. When switching over to a DECT base station using different
access technology, a DECT terminal automatically re-establishes a connection
(roaming).
Be sure to keep the PARK ID of your OpenCom 510 in mind. The PARK ID is dis-
played under System Info: Versions in the Configurator. If the PARK ID starts with
31, there may be an attempt at a handover between DECT base stations using dif-
ferent access technology. In this case, make sure that the signal areas of the DECT
base stations using different access technology do not overlap. If the PARK ID
starts with a different value (e. g. 30), prevention of unintentional handovers is
effective.
136