Aastra OpenCom 510 User Manual page 12

Features
ported. The system can be configured to run both types of access in parallel. S
and S interface cards are available for connecting the system to the telecommu-
2M
nications network. An S
either internal or external connections). The S
S interface for connecting the OpenCom 510 either to a primary multiplex
2M
interface or to a second PBX (ISDN point-to-point connection). For an overview of
interface cards, refer to Modules starting on page 59.
The OpenCom 510 firmware is designed for a maximum of 600 users. For infor-
mation on system limitations, refer to Technical Data starting on page 209.
The following can be connected to the OpenCom 510:
■
Euro ISDN terminals
■
System telephones OpenPhone 71, OpenPhone 73, OpenPhone 75
■
System telephones OpenPhone 61, OpenPhone 63, OpenPhone 65
■
RFP 22 base stations
■
DECT handsets (with RFP 22 connected to DECT-capable U
MS+UPN2-8 interface card)
■
analogue terminals
S interfaces must be operated with Euro ISDN terminals in accordance with the
0
DSS1 protocol.
U ports are suitable for connecting the OpenPhone range of system telephones.
pn
Furthermore, the DECT-capable U
used to connect RFP 22 base stations.
Analogue ports are suitable for connecting standard analogue terminals.
If your network provider supports the CNIP (Calling Name Identification Presen-
tation) feature, the names of callers will be displayed in addition to the numbers
whenever external calls are received. The OpenCom 510 supports the display of
the name on system telephones. However, if you have created an entry in the tele-
phone book under the number of the caller, this entry will be displayed instead.
10
interface card provides eight S
0
ports of the MS+UPN2-8 interface card can be
pn
ports (switchable to
0
interface card provides one ISDN
2M
pn
0
port of