Features - Aastra OpenCom 510 User Manual

Features

1. Features
The OpenCom 510 is a communications system for integrated voice and data com-
munication. The most significant feature of this communications system is its
modular structure. The OpenCom 510 is designed for installation in a 19" frame.
The frame itself can be installed in a 19" wall-mounted enclosure or in a 19" floor-
standing cabinet.
The system provides a number of slots for the installation of modules. In a fully
configured system, the following modules will have been installed (and all slots
will be occupied): 2 power supply units,
1 control module, 12 interface cards. By combining different interface cards, it is
possible to create configurations suited to the user's specific communications
requirements. If, for example, a user requests DECT-capable U
tional S or a/b interfaces, one or more interface cards can be integrated without
0
having to exchange the entire system.
Moreover, OpenCom 510 systems can be cascaded, which allows you to integrate
a higher number of modules, or networked in order to meet growing communica-
tions requirements.
The OpenCom 510 can be integrated into system environments with structured
cabling. All connections to a structured cabling patch panel can be made with
standard patch cables.
The OpenCom 510 supports the following communications applications:
■
Telephony with system telephones, ISDN telephones and analogue terminals,
Internet/intranet data communication, CTI applications, sub-system operation
and system configuration using a standard web browser
■
Additional software packages for expanded telephony functions can be
operated and for making telephone functions more comfortable, e.g. the
digital voicebox and voice portal systems OpenVoice and OpenAttendant.
■
The "DoorLine" intercom system can be operated.
Telephony
The OpenCom 510 communications system is designed to be connected to an
ISDN basic access interface using the DSS1 protocol. Both multi-terminal access
(point-to-multipoint) and system access (point-to-point) configurations are sup-
interfaces or addi-
pn
9