Aastra OpenCom 510 User Manual page 15

Features
the OpenCom 510 and thus benefits from the security features of shared Internet
access.
For detailed information on installing the required driver software and on the
various configuration options, refer to the "OpenPhone 27" user guide. For infor-
mation on configuring the OpenPhone 27 data interface, please refer to the
OpenCom 510 online help.
E-Mail
The OpenCom 510 offers an integrated e-mail function that supports the POP3,
APOP or IMAP4 protocols used to query an Internet service provider for incoming
mail. The OpenCom 510 can be configured to enable every member of staff to
query mail accounts. The OpenCom 510 fetches the incoming e-mail headers (sub-
jects) and senders from the mail server at set intervals and forwards them to the
user's system terminal.
E-mail accounts for the sending e-mail can also can be configured for users. E-
mails can then, for example, be sent directly from the OpenCTI 50 to other users.
In addition, users who have had a voicebox configured for themselves, can let
themselves be notified of new voicebox messages via e-mail.
Important events and errors are kept by the OpenCom 510 in an internal log book:
the error store. To inform or alert the system administrators, entries in the log book
(system messages) can be sent via e-mail.
Voice over IP (VoIP)
The OpenCom 510 supports the connection of VoIP terminals and thereby allow
telephony via the existing company network infrastructure. For this purpose,
corded system terminals of the type "OpenPhone IP" are available. These devices
have the same functionality and support the same features as the non-IP enabled
system terminals "OpenPhone". For users who wish to use PC supported
telephony, the IP system terminals are also available as separate licensable
software variations (OpenSoftphone). You will find further information in the
chapter Voice over IP (VoIP) starting on page 105).
®
DECToverIP
DECT networking via VoIP is another possible option for offices already extensively
using VoIP telephony. The Radio Fixed Parts (RFPs) are connected via network data
connections, so they do not occupy any U ports and can use existing network
pn
connections. With DECToverIP, VoIP protocol data is changed into DECT-com-
patible voice data direct on the RFPs. DECT-RFPs and DECToverIP-RFP can be used
13