Lan Settings - Aastra OpenCom 510 User Manual

Configuration Guide
18.3

LAN Settings

Do you have a computer network?
Do you have a DHCP
server in your network?
Activate the OpenCom
DHCP server.
Enter the Ethernet-IP confi-
guration for the OpenCom.
Enter the address range of the
client computers in your network.
Do you have a DNS server
in your network?
Specify the IP address of the OpenCom
under "Domain Name Server". This is
transferred as the DNS server to the
client computers via DHCP.
Enter the address range
for the RAS accesses.
Flowchart: Configuring LAN Settings
LAN No
Yes
Assign a name
Host name
to the OpenCom.
DHCP Yes
No
Ask your network administrator for the
OpenCom
address range for the RAS accesses. For
DHCP server
this purpose, your administrator must
reserve an IP address range for the RAS
accesses.
IP address
Network mask
Client computers are informed of this
Gateway address
gateway address via DHCP as a gateway.
DHCP adresses
Enter the domain name. This name is
Domain name transferred to the client computers as
the domain via DHCP.
DNS Yes
No
OpenCom as
Register internal DNS
DNS server
PPP addresses
Finished
Finished
The OpenCom takes
the settings from
your DHCP server
Specify the IP address of
your internal DNS server
under "Domain Name
Server". This is transferred as
the DNS server to the client
computers via DHCP.
LAN Settings
195