Trunk Groups - Aastra OpenCom 510 User Manual

PBX Networking

13.3.1 Trunk groups

This is a group of lines of the same type and direction. A line can only be assigned
to one trunk group (bundle).
Network
PBX 1
operator
A
C
B D
PBX 2
Example of a PBX network with trunk groups
In the above example, the following trunk groups are configured for PBX 1:
■
Two S lines in a multi-terminal configuration to the network operator which
0
are assigned to the "A" trunk group.
■
Two S point-to-point connections to PBX 2 which are assigned to the "C" trunk
0
group.
■
One S point-to-point connection to PBX 3 which is assigned to the "E" trunk
0
group.
13.3.2 Routes
A route is a group of trunk groups enabling a connection in one direction. If the
first trunk group of a route is fully utilized, the next trunk group is seized ("trunk
group overflow"). One trunk group can also be used for different routes.
In the above example, a route set up for PBX 1 allows a connection to PBX 2. Trunk
groups "C," "E" and "A" are assigned to this route. If a user connected to PBX 1
wants to reach a party in PBX 2, lines will be seized in the following order:
■
PBX 1 first searches for a free channel in the "C" trunk group.
PBX 3
E
Bundle
Trunk line
Point-to-point
connection
Note: A line or a trunk group cannot be seized directly. It is
always performed indirectly via a route.
Configuration
155