Logic Rule Configuration - Advantech ADAM-6217 User Manual

The top icon definition in GCL Menu:
Icon

Logic rule configuration:

There are 16 logic rules available on one ADAM-6200 module, so you can see 16
logic rule icons here. Simply click the logic rule icon to configure that rule. For exam-
ple, if you want to configure rule 12, just click the logic rule icon with text "Rule 12"
below. The text background color of the selected logic rule icon will become green.
After the rule number selected, you need to check the Enable Rule checkbox to
enable that logic rule and the color of that logic rule icon will become white. Also, you
can write some description for that logic rule by clicking the button next to the Note
text box.
There are four stages for one logic rule: Input Condition, Logic, Execution and
Output. You can simply click the graphical icon to configure each stage and one
related configuration window will pop up.
ADAM-6200 User Manual
Function Description
This icon shows current GCL status. The status repre-
sented in the Icon cell is the Disable, Programming
and Running mode (From top to button)
Current Status Note: You cannot enable Peer-to-Peer/Data Stream
function and GCL function at the same time. So if you
want to enable GCL, Peer-to-Peer and Data Stream
function will be disabled automatically.
Select the Running mode. If this mode is chosen, the
Run GCL
LED below the button is lit.
Select the Programming mode. If this mode is cho-
Program GCL
sen, the LED below the button is lit.
Select the Disable mode. If this mode is chosen, the
Disable GCL
LED below the button is lit.
Click this button to configure IP table. IP table can
IP Table
used to define the destination for output. Only avail-
Configuration
able in the Programming mode.
Enable Online Monitoring. Only available in the Run-
Monitoring
ning mode.
Upload GCL configurations from ADAM-6200 module
Upload Project to computer. Only available in the Programming
mode.
Download current GCL configurations to the ADAM-
Download
6200 module. Only available in the Programming
Project
mode.
Click this button to show current GCL configurations.
Project
You can also save current configurations into a file, or
Content
load previous configuration from a specific file.
88