Advantech ADAM-3750 3-Wire Series Startup Manual

ADAM-3750 3-Wire Series DIO Slave Modules
Startup Manual
Features
• DIN rail mounting (L-124 x W-72 x H-53 mm)
• Max. 20 Mbps transfer rate
• 3-Wire terminal board for actuator/sensor
• Easy installation with RJ45 phone jack and LED diag-
nostic
• Serial interface: half duplex RS-485 with transformer iso-
lation
For more information on this and other Advantech
products, please visit our website at:
http://www.advantech.com
http://www.advantech.com/eAutomation
For technical support and service, please visit our
support website at:
http://service.advantech.com.tw/eservice/
This manual is for ADAM-3750 3-Wire Series.
Part No. 2003000800
1 ADAM-375 3-Wire Series Startup Manual
Specifications
• Cable Type: CAT5 UTP/STP Ethernet cable
• Surge Protection: 10 kV
• Transmission Speed: 2.5 Mbps, 5 Mbps, 10 Mbps and
20 Mbps
• On-line module insertion and removal
• IO Isolation Voltage: 2.5 kVrms
• Input Impedance: 2.4 KΩ / 0.5 W
• Input Current: ±10mA(Max)
• Output Types: NPN/PNP open collector Darlington tran-
sistors
• Switch Capacity: each output channel is 60 mA at 24
VDC
• Response Time: On to Off, about 180 µs; Off to On,
about 1.2 µs
• Power Supply: +18 VDC to +30 VDC
Consumption: 3 W typical
• Working Temperature: 0 to 60° C
1st Edition
August 2004