Low To High Latch Mode - Advantech ADAM-6217 User Manual

Low to High Latch mode

When you choose Low to High Latch mode, once the digital input channel detects
logic level changes from low to high, the logic status will be keep as logic high. The
logic status will remain the logic high, until you clear latch manually. Then the logic
status will back to logic low. The logic status can be seen by the Latch status LED
display. If you want to clear latch, you can do it by clicking the Clear latch button. As
for Invert signal setting, it's the same as mentioned above.
69 ADAM-6200 User Manual