Network; Network Setting; Port Setting; Module Ethernet Protocol And Port - Advantech ADAM-6217 User Manual

4.3.2.2

Network

You can set up required network connection on this page.

Network Setting

You can select the Connection mode as DHCP or Static IP and configure the MAC
address, IP address, Subnet address, Default gateway and Host Idle (timeout).

Port Setting

You can set up the network port for DataStream and P2P/GCL function.
Note! 1.
2.

Module Ethernet Protocol and Port

TCP Modbus
Download
Config. Upload
Web Server
Search Engine
ASCII CMD
P2P/GCL
Data Stream
GCL remote Message UDP
Static IP mode is set 10.0.0.1 as default.
Network Diagnostic (Default: ON) - ADAM module will actively
monitor and diagnose the Ethernet switch periodically when it's
enabled. However, if you have no need to use Ethernet ports for
communication, please notice to disable this function.
TCP 502
TCP 5450
TCP 5452
TCP 80
UDP 5048
UDP 1025
UDP 1025 Configurable
UDP 5168
5168
51 ADAM-6200 User Manual