Read Analog Output Range Code From Channel N - Advantech ADAM-6217 User Manual

$aaBEcc
Name

Read Analog Output Range Code from Channel N

Description Returns the range code from a specified analog output channel in a
specified module.
Syntax $aaBEcc(cr)
$ is a delimiter character.
aa (range 00-FF) represents the 2-character hexadecimal slave
address of the ADAM-6200 module you want to request. (Always 01)
cc (range 00-03) represents the specific channel you want to read the
range code.
(cr) is the terminating character, carriage return (0Dh).
Response !aa(code) if the command is valid.
?aa(cr) if an invalid operation was entered.
There is no response if the module detects a syntax error or communi-
cation error or if the address does not exist.
! delimiter indicating a valid command was received.
? delimiter indicating the command was invalid.
aa (range 00-FF) represents the 2-character hexadecimal slave
address of the ADAM-6200 module you want to request. (Always 01)
nnnn stands for Analog output range code
(cr) is the terminating character, carriage return (0Dh).
173 ADAM-6200 User Manual