Advantech ADAM-2510Z User Manual
  1. Manuals
  2. Brands
  3. Advantech Manuals
  4. Control Unit
  5. ADAM-2510Z
  6. User manual

Advantech ADAM-2510Z User Manual

Wireless sensor network data acquisition modules
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
User Manual
ADAM-2000 Series
Wireless Sensor Network Data
Acquisition Modules

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ADAM-2510Z and is the answer not in the manual?

Questions and answers

Related Manuals for Advantech ADAM-2510Z

Summary of Contents for Advantech ADAM-2510Z

  • Page 1 User Manual ADAM-2000 Series Wireless Sensor Network Data Acquisition Modules...
  • Page 2 No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reliable. How- ever, Advantech Co., Ltd.
  • Page 3 This product has passed the CE test for environmental specifications when shielded cables are used for external wiring. We recommend the use of shielded cables. This kind of cable is available from Advantech. Please contact your local supplier for ordering information.
  • Page 4 Discard used batteries according to the manufacturer's instructions. Note! Advantech reserves the right to change this manual at any time without notice. Document Feedback To assist us in making improvements to this manual, we would welcome comments and constructive criticism.
  • Page 5 The sound pressure level at the operator's position according to IEC 704-1:1982 is no more than 70 dB (A). DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech disclaims all responsibility for the accuracy of any statements contained herein.
  • Page 6 ADAM-2000 Series User Manual...

  • Page 7: Table Of Contents

    Wireless Signal Indicator .............. 3 1.1.6 Industrial Standard Modbus Protocol..........4 1.1.7 SCADA Software Support............. 4 1.1.8 Advantech Software Alignment............. 4 Specifications .................... 4 1.2.1 ADAM-2000 Series Hardware Specification ......... 4 1.2.2 LED Status..................5 Figure 1.3 LED Indicators ............5 Table 1.2: LED Indicator Definitions ..........
  • Page 8 Figure 4.13 Information page of ADAM-2510Z......39 Figure 4.14Wireless Configuration page of ADAM-2510Z ..39 Figure 4.15 The Device Status page of the ADAM-2510Z ..40 Figure 4.16 Information Page of ADAM-2051Z ......40 Figure 4.17Wireless Configuration page of ADAM-2051Z ..41 Figure 4.18The Device Status page of the ADAM-2051Z ..
  • Page 9 Table B.1: Modbus ID Table of ADAM-2000 series ....56 B.2.1 ADAM-2520Z ................56 Table B.2: ADAM-2520Z Function Table ........56 B.2.2 ADAM-2510Z ................57 Table B.3: ADAM-2510Z Function Table ........57 B.2.3 ADAM-2017Z................57 Table B.4: ADAM-2017Z Function Table ........57 B.2.4 ADAM-2031Z ................58 Table B.5: ADAM-2031Z Function Table ........
  • Page 10 ADAM-2000 Series User Manual...

  • Page 11: Chapter 1 Understanding Your System

    Chapter Understanding Your System...

  • Page 12: Introduction

    Introduction ADAM-2000 series is the wireless solution of the ADAM families and integrates the IEEE 802.15.4 standard, I/O and Sensor technologies known as Wireless Sensor Network. Different from the wired solution, the flexible network capability makes it easy to extend or construct a cost-effective distributed monitoring system for variety of applications.

  • Page 13: Wireless Sensor Network

    PHY and MAC layers. The working RF are 868MHz for USA, 918MHz for EU and 2.4GHz for World Wide. Table 1.1: Wireless Specifications Feature(s) IEEE 802.11b Bluetooth ZigBee Data Rate 11Mbps 1Mbps 250Kbps Power Consumption Hours (High) Days Years (Low) Transmission Distance 100m 70m~300m...

  • Page 14: Industrial Standard Modbus Protocol

    SCADA Software Support ADAM-2000 supports industrial standard Modbus protocol and can be integrated into Advantech HMI, WOP, SCADA - WebAccess and 3rd party HMI. With the different ADAM-2000 modules, it is able to acquire signal from digital input, analog input, tem- perature, humidity, luminance and CO2 concentration then the signals can be apply to your application.

  • Page 15: Led Status

     Storage Humidity: 0% ~ 95% Note! This products components will operate at temperatures up to 85°C how- ever the case the casing will crack if subjected to temperatures above 70°C for a long period. If you need to operate the device in temperatures exceeding those stated, contact your nearest sales agent.

  • Page 16: Wireless Communication Range

    1.2.3 Wireless Communication Range Thought the wireless technology brings the advantage of flexibility, cost-effective wir- ing and easy deployment, but users must understand its limitations to enjoy the ben- efits of the wireless technology. The Link Quality Indicator (LQI) of the ADAM-2000 displays how the facts below affect the wireless signal.

  • Page 17: Dimensions

    Dimensions Figure 1.4 ADAM-2000 Series Dimensions ADAM-2000 Series User Manual...

  • Page 18: Mounting

    Mounting ADAM-2000 series modules are designed as compact units and are allowed to be installed in the field site with the following method. 1.4.1 Panel Mounting Each ADAM-2000 Module is packed with a plastic panel mounting bracket. Users can refer the dimensions of the bracket to configure an optimal placement in a panel or cabinet.

  • Page 19: Din-Rail Mounting

    1.4.2 DIN-rail Mounting The ADAM-2000 module can also be secured to the cabinet by using mounting rails. Fix the ADAM-2000 module with the DIN-rail adapter as Figure 3.2. Then secure it on the DIN-rail as Figure 3.3. If you mount the module on a rail, you should also consider using end brackets at each end of the rail.

  • Page 20: Wiring & Connections

    Wiring & Connections This section provides basic information of wiring the power supply, I/O units, commu- nication units, and network connection. 1.5.1 Power Supply Wiring You can choose power supply type with 3 type: USB port, RS-485 port, battery for ADAM-2520Z gateway, other devices can use RS-485 or battery to get power.

  • Page 21: I/O Module Wiring

    1.5.1.2 ADAM-2520Z Basic Configuration with USB Power Supply To use the USB cable as a power supply from a PC, connect the T Type USB con- nector to the computer and the other end (USB Type B) to the ADAM-2520Z WSN Gateway.
  • Page 22 Figure 1.9 RS-422/485 and USB interface of ADAM-2520Z. Figure 1.10 Wiring Diagram for ADAM-2520Z Figure 1.11 TTL Input Wiring Diagram Figure 1.12 Contact Closure Input Wiring Diagram ADAM-2000 Series User Manual...

  • Page 23: Chapter 2 Selecting Your Hardware

    Chapter Selecting Your Hardware...

  • Page 24: Selecting An Adam-2000 Module

    Selecting an ADAM-2000 Module Communication Module ADAM-2520Z, ADAM-2510Z I/O Module ADAM-2051Z, ADAM-2051PZ, ADAM-2017Z Sensor Module ADAM-2031Z 2.1.1 Selecting a Communication Module Communication modules are fundamental when needing to perform data acquisition and control Wireless Sensor Networks systems. There are two types of communica- tions modules: the coordinator and the router.

  • Page 25: Selecting An I/O

    2.1.2 Selecting an I/O To organize an ADAM-2000 series remote data acquisition and control system, you need to select proper I/O or sensor modules to connect to field devices or processes that you have previously determined. Table 2.3: I/O Selection Guidelines Choose this I/O For these types of field devices or Description:...

  • Page 26: Selecting An Operator Interface

    To integrate ADAM-2000 series I/O with HMI, Human Machine Interface, software in a SCADA, Supervisory Control and Data acquisition, system, there are a lot of HMI software packages which support Modbus driver.  Advantech Studio  Advantech WebAccess  Wonderware InTouch ...

  • Page 27: Chapter 3 Installation Guide

    Chapter Installation Guide...

  • Page 28: Determining The Proper Environment

    Determining the Proper Environment Prior to installing ADAM-2000 series modules, please check the following. 3.1.1 Package Contents Unpack the package and make sure that the contents include:  ADAM-2000 series module  2 dBi antenna  2 x Mounting kits ADAM-2000 series CD (User manual, datasheet, Quick start guide and- ...
  • Page 29 An End Device (End Node) is the basic element to acquire the physical signals and data from I/O, sensor and even communication interface. It can be designed for many different functions and is possible for standalone applications by battery-power. Figure 3.1 The Architecture of the Wireless Sensor Network ADAM-2000 Series User Manual...

  • Page 30: Establish The Connection

    Establish the Connection 3.2.1 Basic Installation In the side of the ADAM-2000 series, users can find Mode Switch and Function Button. The two hardware keys contain several combinations for device operations. The default position of Mode Switch is set in the Initial Mode to configure the device and establish connection for Normal Mode.
  • Page 31 3.2.1.2 Router/End Device Routers and End Devices must have to associate with corresponding Pair ID Coordi- nator in Initial Mode to build up the wireless communication. The function is for Router and End Devices only. Power on. All LEDs turn on for 0.5 second then turn off. Press the Function Button 3 times to join a PAN with the default Pair ID 1.
  • Page 32 Once the Coordinator, Routers and End Devices are connected in the same Pair ID then all devices can be configured through ADAM.NET Utility for Normal Mode opera- tion. (For detailed operation and functionality of ADAM.NET Utility, please refer to Chapter 5.) Push the Mode Switch to the Normal position to reboot the device to Normal Mode.

  • Page 33: Adam-2000 Series Installation Flowcharts

    3.2.2 ADAM-2000 Series Installation Flowcharts The following flowcharts are designed to tell you how to install the ADAM-2000 mod- els. 3.2.2.1 ADAM-2000 Series Installation Overview The section describe how to host a WPAN for ADAM-2000 series. The coordinator, end devices are basic component for the wireless data acquisition system. Routers are optional to enhance the network coverage and mesh mechanism.
  • Page 34 3.2.2.2 Coordinator Configuration Flowchart The section tells the user how to setup the Coordinator to host a PAN for a wireless sensor network. Install Power Please refer to Please refer to Connect to PC through Appendix C for Appendix C for USB or RS-422/485 troubleshooting.
  • Page 35 3.2.2.3 Router Configuration Flowchart The section tells the user how to setup the Router to enhance the wireless communi- cation range and coverage of a PAN for a wireless sensor network. Install Power Please refer to Please refer to All LEDs turn On Appendix C for Appendix C for (Green LED turns on while powering by...
  • Page 36 3.2.2.4 End Device Configuration Flowchart The section tells the user how to setup the End Devices to do data acquisition of a PAN for a wireless sensor network. Install Power Please refer to Please refer to All LEDs turn On Appendix C for Appendix C for (Green LED turns on while powering by...

  • Page 37: Advanced Functions

    Advanced Functions 3.3.1 Link Quality Indicator The LQI represents the wireless signal index and can assist the user to install the ADAM-2000 devices in proper location for good communication quality. The LQI function is only available for Router and End Devices. Press the Function Button once and the Level Index in the front panel will turn on to indicate the level of LQI.

  • Page 38: Pairing

    3.3.4 Pairing In the Initial Mode, Routers and End Devices must be associated with the corre- sponding Coordinator. The function is for Router and End Devices only. 1. Press the Function Button 5 times to enter the change Pair ID mode. 2.

  • Page 39: Chapter 4 Software Configuration Guide

    Chapter Software Configuration Guide...

  • Page 40: System Software Configuration Utility

    Before installing ADAM.NET Utility, you need to install the .NET Framework 1.1 or later. Advantech provides a free download of ADAM.NET Utility software for module opera- tion and configuration. You can find the Utility installation file in the CD with your mod- ule, or on our website at: http://www.advantech.com and click the Download Area...
  • Page 41 Help Menu: Check Up-to-Date on the Web - Choose this option, it will automatically connect to Advantech download website.You can download the latest utility there. About Adam.NET Utility - Choose this option, you can see version of ADAM.NET Utility installed on your computer.
  • Page 42 Toolbar There are 7 graphical icons on the toolbar for 7 common used options of Menus. Fig- ure 5.2 below shows definition for each graphical icon. Print Screen Monitor Stream/Event Data Terminal for Command Testing Add Devices to Group Search Modules Save Favorite Group Open Favorite Group Figure 4.2 ADAM.NET Utility Toolbar...

  • Page 43: Search And Configure The Adam-2000 Series

    4.3.1 Search and Configure the ADAM-2000 Series The ADAM-2000 series can be searched and configured through ADAM .NET Utility. Make sure the ADAM-2000 devices are installed properly in Initial Mode. For more information, please refer to the section 3.4. The supported Wireless Sensor Networks Modules are listed in the information page Figure 4.3 ADAM-2000 Series ADAM .NET Utility Support If the user wants to use USB cable to connection with ADAM utility on PC, they need to install USB chip driver in CD.
  • Page 44 Click the "Serial" in the Wireless Sensor Networks category then click right button to select the "Refresh Subnode" to search the virtual COM port on the host PC. Figure 4.4 Search the USB interface ADAM-2000 devices on the host PC for the virtual COM port.
  • Page 45 The "Searching the network" diaglog will pop up, click "Start" to search the ADAM- 2000 devices. The ADAM .NET Utility search the ADAM-2000 Coordinators from Modbus ID 241 to 244, please refer to the Appendix B.2 for more information. Figure 4.6 Searching the network dialog The ADAM-2000 coordinators will be listed on the Tree View of the selected COM port till the Modbus is 244 or user can cancel the searching.
  • Page 46 Make sure they are in initial mode Set PAN ID in the same group Bellow picture is router or end-device signal label for you reference, it also list on ADAM-2000 series part. Press Button Function 2 seconds Reboot / Confirm 1 time Link Quality Indicator 2 times...
  • Page 47 Folder of ADAM-End Device lists the ADAM-2000 end devices in Tree View and List View of End Device page. The page contains an overview of the end devices and the status. Figure 4.9 The overview of ADAM-2000 end devices. Folder of ADAM-Router lists the ADAM-2000 routers in Tree View and List View of Router page.
  • Page 48 In the Information page: User can download the firmware to the ADAM-2520Z if there is any upgrade firmware from the Advantech. User can modify the COM port parameters for Normal Mode. Figure 4.11 Information page of ADAM-2520Z Select the "Wireless Configuration" page.
  • Page 49 4.3.1.2 Router - ADAM-2510Z Click the ADAM-2510Z, it will display the Information, Wireless Configurations and Device Status. In the Information page, users can download the firmware to the ADAM-2510Z if there is any upgrade firmware from the Advantech. Figure 4.13 Information page of ADAM-2510Z In the Wireless Configuration page, set PAN ID and RF Channel to host a PAN for wireless communication in Normal Mode.
  • Page 50 In the Device Status page, user can check the Module Status, Link Quality, Battery Status and External Power of a device. Figure 4.15 The Device Status page of the ADAM-2510Z 4.3.1.3 End Device - ADAM-2017, ADAM-2031Z, ADAN-2051Z, ADAM-2051PZ Click the ADAM-2051Z, it will display the Information and Wireless Configuration pages.
  • Page 51 In the “Wireless Configuration page”: Set PAN ID and RF Channel to host a PAN for wireless communication in Nor- mal Mode. The Duty Cycle is the transmit interval of the device, the device can update the data by 1 second to 1 day. Figure 4.17 Wireless Configuration page of ADAM-2051Z In the Device Status page, user can check the Module Status, Link Quality, Battery Status and External Power of a device.
  • Page 52 Click the ADAM-2031Z, it will display the Information and Wireless Configuration pages. Figure 4.20 Information Page In the Information page, user can download the firmware to the ADAM-2051Z if there is any upgrade firmware from Advantech. ADAM-2000 Series User Manual...
  • Page 53 In the "Wireless Configuration page": 1. Set PAN ID and RF Channel to host a PAN for wireless communication in Normal Mode. 2. The Duty Cycle is the transmit interval of the device, the device can update the data by 1 second to 1 day. Figure 4.21 Wireless Configuration Page In the Device Status page, user can check the Module Status, Link Quality, Battery Status and External Power of a device.

  • Page 54: Network Topology Of Adam-2000 Series

    In the Sensor page, user can see data get form device by sensor. Figure 4.23 Sensor Page 4.3.2 Network Topology of ADAM-2000 Series After the ADAM-2000 devices have been discovered, all the devices will be listed on the Tree View and the Topology also lists the relations between devices in advance. Click the Topology, the relations of ADAM-2000 devices will be illustrated in the Topology page.
  • Page 55 The function allows user to put a picture on the background and drag the compo- nents to any positions of the background. With the function, user can easily maintain and check the status of the ADAM-2000 network. Figure 4.25 Topology of ADAM-2000 network with specific background image ADAM-2000 Series User Manual...
  • Page 56 ADAM-2000 Series User Manual...

  • Page 57: Chapter A Module Introduction

    Appendix Module Introduction...

  • Page 58: Communication Modules

    Communication Modules A.1.1 ADAM-2510Z Wireless Sensor Network Router Node ADAM-2510Z is a wireless signal repeater / router which is used to extend communi- cation range between the coordinator/gateway and the end device. A.1.1.1 ADAM-2510Z Specifications Wireless:  IEEE Standard: IEEE 802.15.4 ...

  • Page 59: Adam-2520Z

    A.1.2 ADAM-2520Z Wireless Sensor Network Modbus RTU Gateway The ADAM-2520Z is designed as a gateway to translate the IEE 802.15.4 WPAN to Modbus Network. In a WPAN, the ADAM-2520Z works as a coordinator to collect and translate data from end devices to host PC. A.1.2.1 Specifications Wireless:...

  • Page 60: I/O And Sensor Modules

    I/O and Sensor Modules A.2.1 ADAM-2017Z Wireless Sensor Network 6-ch Analog Input Node The ADAM-2017 is an analog input data acquisition module with 6 channels to mea- sure the voltage and current. A.2.1.1 Specifications Wireless:  IEEE Standard: IEEE 802.15.4 ...

  • Page 61: Adam-2031Z

    A.2.2 ADAM-2031Z Wireless Sensor Network Temperature and Humidity Sensor Node The ADAM-2031 is an end device embedded sensors to measure the temperature and humidity physical signal. A.2.2.1 Specifications Wireless:  IEEE Standard: IEEE 802.15.4  Modulation Type: DSSS (OQPSK)  Frequency Band: ISM 2.4GHz (2.4 GHz ~ 2.4835 GHz) ...

  • Page 62: Adam-2051Z

    A.2.3 ADAM-2051Z Wireless Sensor Network 8-ch Digital Input Node The ADAM-2051Z works as an end device provides 8-ch digital input. A.2.3.1 ADAM-2051Z Specifications Wireless:  IEEE Standard: IEEE 802.15.4  Modulation Type: DSSS (OQPSK)  Frequency Band: ISM 2.4GHz (2.4 GHz ~ 2.4835 GHz) ...

  • Page 63: Adam-2051Pz

    A.2.4 ADAM-2051PZ Wireless Sensor Network 8-ch Digital Input Node with Power Amplifier The ADAM-2051PZ works as an end device provides 8-ch digital input with wireless power amplifier for better transmission power and receive sensitivity to enhance communication range and quality. A.2.4.1 ADAM-2051PZ Specifications Wireless:...
  • Page 64 ADAM-2000 Series User Manual...

  • Page 65: Chapter Badam-2000 Series Functions

    Appendix ADAM-2000 Series Functions...

  • Page 66: Introduction

    Introduction ADAM-2000 series supports Modbus RTU protocol and serves as Modbus slave devices that takes commands from a Modbus master. Each module has its own unique Modbus ID such that master can address each individual slave. The ADAM- 2000 series are the Modbus RTU ready communication solution for Wireless Sensor Network data acquisition applications.

  • Page 67: Adam-2510Z

    B.2.2 ADAM-2510Z Wireless Sensor Network Router Node 03 Read Holding Register Table B.3: ADAM-2510Z Function Table Address 4x Description Attribute Value 20001 Module Status Read Bit0: 0; Initial Mode Bit0: 1; Normal Mode Bit1: 0; No External Power Input Bit1: 1; External Power Input...

  • Page 68: Adam-2031Z

    B.2.4 ADAM-2031Z Wireless Sensor Network Temperature and Humidity Sensors Node Table B.5: ADAM-2031Z Function Table Address 4X Description Attribute Value 00001 Temperature Input Read 0x0000 ~ 0xFFFF* 00002 Humidity Input Read 0x0000 ~ 0xFFFF** 20001 Module Status Read Bit0: 0; Initial Mode Bit0: 1;...

  • Page 69: Adam-2051Z

    B.2.5 ADAM-2051Z Wireless Sensor Network 8-ch Digital Input Node Table B.6: ADAM-2051Z Function Table Address 4X Description Attribute Value 00001 DI 0 Read Bit0: 0; Off Bit0: 1; On 00002 DI 1 Read Bit0: 0; Off Bit0: 1; On 00003 DI 2 Read Bit0: 0;...

  • Page 70: Adam-2051Pz

    B.2.6 ADAM-2051PZ Wireless Sensor Network 8-ch Digital Input Node with Power Amplifier Table B.7: ADAM-2051PZ Function Table Address 4X Description Attribute Value 00001 DI 0 Read Bit0: 0; Off Bit0: 1; On 00002 DI 1 Read Bit0: 0; Off Bit0: 1; On 00003 DI 2 Read...
  • Page 71 Appendix Troubleshooting...

  • Page 72: Chapter C Troubleshooting

    Troubleshooting Q1: Why is the Error LED blinking? The Coordinator is not hosting a PAN yet. The PAN ID and Channel might be occupied by another Coordinators. Change to different PAN ID and Channel in initial mode. The Router/End Device is not joining a PAN. Check if there is a coordinator with specified PAN ID and Channel to join.

  • Page 73: Notice

    Notice When there are 4 set of devices being coordinated at the same time, the level Index light will be lit by turns. Devices in initial mode will in high power consumption status, beware of your power status when using batteries. When using the ADAM utility the initial value of an ADAM-2051Z is 1.
  • Page 74 All brand and product names are trademarks or registered trademarks of their respective companies. © Advantech Co., Ltd. 2011 Notice : The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This manual is also suitable for:

Adam-2000 seriesAdam-2520zAdam-2017zAdam-2031zAdam-2051zAdam-2051pz

Table of Contents