Table of Contents
Advertisement
Input Range
You can select input channel and its voltage/current range and click Apply button to
take effect.
Calibration
It's for sure that each module is well calibrated when it's in manufacturing process.
However, in certain applications, user may need to redo the calibration with their
device. If you want to enable this, please go to Setup menu and click Allow Calibra-
tion first, then click Auto button to open the calibration page. The calibration process
will automatically run without any input signal in around 20 seconds, after that, please
click apply button to finish the process.
Integration Time
In order to remove the DC noise from the power supply, there are two kinds of fre-
quency built-in analog input modules to filter it. You can select and apply this feature
here as your request.
Burnout
Presently, it's only support for 4 - 20mA input range. If you select up scale, you will
see the value FFFF in Modbus address when open circuit happens. Otherwise, it will
show 0000 as down scale.
59
ADAM-6200 User Manual
Hide quick links:
Advertisement
Table of Contents
