Initial Inspection; Board Layout; Card Configuration - Advantech PCM-3618 User Manual

1.4

Initial Inspection

We carefully inspected the PCM-3618 both mechanically and electrically before we
shipped it. It should be free of marks and scratches and in perfect electrical order on
receipt. Handle the board only by its edges. The static change on your body may
damage its integrated circuits. Keep the card in its anti-static package whenever it is
not installed. You can use this package to return the card if it should need repair.
1.5

Board Layout

1.6

Card Configuration

Each port on the PCM-3618 card requires configuration prior to use. The DIP
switches set the port to the appropriate I/O address (SW2) and different modes
(SW1). The jumpers set the port's IRQ.
3 PCM-3618 User Manual