Advertisement
Module Configuration
Advantech's WISE-4671 NB-IoT /LTE-M wireless I/O module can be configured to support either NB-IoT or LTE-M using the
WISE Studio utility via a USB port. For advanced industrial applications, WISE-4671 can be equipped with optional GPS, a
solar rechargeable battery, and an IP65-rated enclosure to protect from water and dust ingress. The WISE-4671 wireless I/O
module features an intelligent modular design that supports various I/O configurations according to usage requirements. This
allows users to easily integrate their desired I/O module (WISE-S672, WISE-S614 etc.) with the WISE-4671 module.
There are three ways to power up the WISE module, battery power, solar panel power and line power.
Open the rubber cover on the side of the WISE module and you can see a battery switch for turning on/off the battery power.
For solar power, it is not only to recharge the battery but also to power up the device.
Refer to the application wiring section for solar panel power and line power pin assignment.
Also, there is a USB port for the device configuration via WISE Studio but note that the WISE device cannot be powered via
USB.
Note: Turn off the device when swapping the I/O module to avoid hardware damage.
WISE-4671 Startup Manual 7
LUCOM GmbH — Flößaustr. 22a — 90763 Fürth — Tel.: +49 911/ 957 606 00 — E-Mail: info@lucom.de — www.lucom.de
Advertisement
